Wall Mounts
NOW SHIPPING:
Universal Small- and Large-Based Options, Proudly Manufactured in the USA
PTZOptics Camera Wall Mounts
Professional PTZ Wall Mounts
Wall Mounted PTZ Cameras Done Right
Please note: Cameras wider than 5 11/16″ should consider the HCM-2 large camera mount. For the Move 4K 30X & Link 4K 30X, use the PT-WM-3.
Unrivaled Warranties
PTZ Camera Mount Types
| TYPE | SKU | MSRP | DOCUMENTS |
|---|---|---|---|
| Wall | HCM-1-xx | $99 | Setup Guide | Data Sheet |
| HCM-2-xx | $132 | Setup Guide | Data Sheet | |
| PT-WM-3-xx | $121 | Setup Guide | Data Sheet | CAD Line Drawing | |
| Ceiling | PT-CM-1-xx | $66 | Setup Guide | Data Sheet | CAD Line Drawing |
| PT-CM-3-xx | $66 | Setup Guide | Data Sheet | CAD Line Drawing | |
| Pole | |||
| PT-PM-3-xx | $154 | Setup Guide | Data Sheet | CAD Line Drawing | |
| HCM-1C-WH | $121 | Setup Guide | Data Sheet | |
| HCM-2C-WH | $154 | Setup Guide | Data Sheet |
Please note: We highly recommend using the included drywall anchors and supplied screws to increase installation.
Included Hardware
Here is a list of hardware included to make sure you are ready for any mounting scenario. Reference our manual here for more information.
- Qty 1 – Small Wall Mount
- Qty 1 – 1/4 20 x 3/8”
- Qty 2 – 1/4” washer
- Qty 4 – #10 x 1 1/4” screws
- Qty 4 – #10-12 x 1” conical plastic anchors
- Qty 4 – #6 washers
Where to Buy
Ready to get started? Just fill out the form below and we’ll be in touch shortly.
Proudly Partnering With:
Wall Mount Camera Compatibility
Below is a list of camera models compatible with PTZOptics and HuddleCamHD wall mounts.
The HCM-1 camera wall mount is a metal wall mount with four mounting holes to connect the mount to the wall. The mount also includes a quarter twenty connection to securely attach most PTZ cameras to the mount. All our mounts are capable and strong and accommodate PTZOptics cameras. For the Move 4K 30X & Link 4K 30X, use the PT-WM-3.
This camera wall mount includes all the necessary installation hardware. Depending on your mounting surface, use a level and tape measure to mark your mounting location. Use a drill to prepare all holes. The only other tool you will need is a screwdriver.
In many cases, you can use the eye level of your subjects as a guide to mount your camera. For example, if you install a camera in a small conference room where people will be sitting, you can measure the height of the chairs and the average person’s eye level. If you are in a stage environment, you can measure from the stage floor to the eye level of people standing. The further you are from subjects, the higher the cameras can be mounted.
