PTZOptics
PT-JOY-G4
NOW SHIPPING:
All-New Versatile Joystick
For IP OR Serial Control
A Controller for All Production Setups
Introducing the PTZOptics 4th Generation IP Joystick Controller. Compatible with most PTZ cameras operating serial or IP protocol, including Sony, the PT-JOY-G4 is a legacy-friendly controller designed to easily integrate into a wide array of existing production systems, and even allows users to switch between protocols with the touch of a button.
Enhanced Setup Management
A newly added web user interface will decrease your set up time, allowing you to get multiple cameras up and running in as little as five minutes! If you’re using the PT-JOY-G4 for different productions or sets, we’ve got you covered. Import and export settings for specific use cases or production environments.
For network setup, the PT-JOY-G4 will dynamically obtain an IP address upon connection to your LAN. If your network is not able to supply DHCP addresses, you can assign a static IP address to the controller.
Streamlined Production at Your Fingertips
With an expanded LCD screen and a wide range of knobs for fine tuning, a single camera operator can easily:
- Operate cameras in basic, matrix and normal modes
- Access cameras and quickly recall preset locations
- Control white balance, red and blue gain, shutter speed and more!
- Use web-based and smartphone app control for added flexibility
A Smart Acquisition for Any Production
Backed by PTZOptics’ 2-year warranty, plus full support from PTZOptics’ technical team, the PT-JOY-G4 is an ideal choice for video production in schools, houses of worship and other broadcast and live streaming scenarios.
And with an MSRP of only $1,099, a better production experience is within reach.
The unit comes with a 12V 2A DC International Power Supply and an 8-foot RS-232C cable.
New Custom Button
Take a new level of control over your production with a customizable joystick button. This button is conveniently located at the top of the joystick controller for quick access to your most used functions. This joystick button is fully customizable so you can choose if you want it to start recording in your video production software OR start auto-tracking on your currently selected camera.
Automatic Triggers
PTZOptics IP joystick controllers now support automatic triggers which can be used to trigger a command when switching a camera. Automatic Triggers are ideal for integrating your PT-JOY-G4 or PT-SUPERJOY-G1 joystick controllers with your video switcher or other production equipment. Use Automatic Triggers to automate your video production workflow to effortlessly queue up your next camera or prepare your next scene.
Unrivaled Warranties
With robust warranties included standard on every product, you can trust PTZOptics solutions to deliver high performance from day one, and for many years to follow.
The PT-JOY-G4 comes with a 2-year limited parts and labor warranty. PTZOptics stands by our promise to protect your investment by providing repairs or replacement products for the duration of your warranty. For more information, view our complete warranty documentation for products purchased in the United States here. View our warranty documentation for products purchased internationally here.
PTZOptics Continuous Advantage
PTZOptics products continuously improve over their lifespan. Since 2014, PTZOptics has provided customers with regular, free product updates based on customer feedback, enhancing the value and functionality of their products over time. For example, the PTZOptics award-winning second generation camera line was improved with over 100 new features over its 7-year production life-span. Beginning in 2023, updates can be applied with a single click. Additionally, our new PTZOptics Discord channel allows users to communicate directly with our engineering team and access beta firmware. This approach enables products to evolve with users’ needs, increasing their overall value. Learn about our beta tester program here.
Unparalleled Value, Award-Winning Support
When you reach out to PTZOptics for support, you won’t get an automated system — you’ll get a team of in-house, US-based experts ready to help. Connect with us via:
- Phone, email, and chat
- Our detailed knowledge base and forum
- Our online Udemy course
- Our support ticket system
- Our Facebook user group
- Our monthly live shows
Features and
benefits
- VISCA over IP or Serial Control
- Full Pan, Tilt, Zoom Camera Control
- Fine Tune Focus Control
- Focus Lock and Unlock
- Larger LCD Screen with Controller Status
- Direct Exposure
- White Balance
- Red & Blue Gain Control
Joystick Comparison
PT-JOY-G4
$1,099
-
IP or Serial Control*
-
Cabling: RS-232, RS-485, RS-422, RJ-45
-
Max Cable Distance: 3,937’ (1200m) using 24 gauge twisted pair (for RS-485 only)
-
Power: DC12V or PoE (802.3af)**
-
Control Protocols: VISCA over IP (PTZOptics & Sony) or Serial Control (RS232, RS485, Pelco-D, & Pelco-P)
-
Maximum Cameras: 255 cameras via network, 7 cameras via serial VISCA
-
Design Notes: Compatible with most PTZ cameras
-
USB (Only for firmware upgrades)
-
HDMI
HC-JOY-G4
$609
-
Serial Control
-
Cabling: RS-232, RS-485, RS-422
-
Max Cable Distance: 3,937’ (1200m) using 24 gauge twisted pair (for RS-485 only)
-
Power: DC12V
-
Control Protocols: VISCA, PELCO-D, PELCO-P
-
Maximum Cameras: 255 cameras
-
Design Notes: Works with any PELCO camera
-
USB
-
HDMI
SuperJoy
$1,429
-
IP and Serial Control
-
Cabling: RS-232, RS-485, RS-422, RJ-45
-
Max Cable Distance: 3,937’ (1200m) using 24 gauge twisted pair (for RS-485 only)
-
Power: DC12V OR PoE (802.3af)*
-
Control Protocols: VISCA over IP (PTZOptics & Sony), Serial Control (RS-232, RS-485, Pelco-D, & Pelco-P), & NDI®
-
Maximum Cameras: 255 total cameras (28 cameras (4 groups of 7 channels) plus a group with up to 227 cameras)
-
Design Notes: Compatible with most PTZ cameras
-
USB (Only for firmware upgrades)
-
HDMI
Where to Buy
Ready to get started? Just fill out the form below and we’ll be in touch shortly.
Proudly Partnering With Distributors Around the World!
North America
International
...And More Worldwide!
See What Our Customers Are Saying
Single Cable Simplicity
The PT-JOY-G4 includes Power Over Ethernet (PoE). Take control of cameras all across your network with a single Ethernet cable connection. Simplify your next joystick setup with a PoE network switch.
Looking for the previous generation of IP Joystick? Check it out here.
The PT-JOY-G4 is compliant with NDAA 2019, Section 889. This product does not contain components from any of the companies highlighted in NDAA 2019, Section 889.
- VISCA: Serial connections include PTZ cameras with RS-232, RS-485, and RS-422 from brands such as Aver, AIDA, BirdDog, Bolin, ClearOne, DataVideo, JVC, Lumens, Marshall Electronics, RGBLink, PTZOptics, SONY
- SONY VISCA over IP: Includes PTZ cameras from AIDA, AVer, BirdDog, Bolin, BZBGear, ClearOne, JVC, Lumens, SONY
- PTZOptics VISCA: All PTZOptics cameras, HuddleCamHD
- PELCO-P and PELCO-D: Includes PTZ cameras from BirdDog, DataVideo, JVC, Lumens, RGBLink, Marshall Electronics
*These brands support industry standard protocols. Please check individual camera models to ensure compatibility with the standards supported by our joystick controllers.
| Key Technical Specifications | Connections | RS-232, RS-485, RS-422, RJ-45 |
| Maximum Cameras | 253 cameras via network 7 cameras via serial VISCA | |
| Recommended Maximum Distance | RS-232 / RS-422: 50 ft (15m) RS-485: 3,937 ft (1200m) Ethernet: 328 ft (100m) | |
| Baud Rate | 1200 ~ 19200 bps | |
| Operation Specifications | Power | 6W (12VDC) / PoE (802.3af) |
| Working Temp | 14° F ~ 122° F (-10° C ~ +50° C) | |
| Working Humidity | 10% ~ 90% (non-condensation) | |
| Weight | 4.45 lbs (2.02 kg) | |
| Dimensions (in.) | 11.938 W x 9.25 D x 4.25 H | |
| Dimensions (mm) | 303.23 W x 234.95 D x 107.95 H | |
| Other | Warranty | 2 Years |
PT-JOY-G4 Documentation
| SKU | MSRP | Documents |
|---|---|---|
| Serial/IP Joystick: PT-JOY-G4 | $1099 | Data Sheet | Manual | CAD Line Drawing | 3D CAD Renders |
| Serial & IP Joystick: PT-SUPERJOY-G1 | $1429 | Data Sheet | Manual | CAD Line Drawing | 3D CAD Renders |
| Serial Joystick: HC-JOY-G4 | $609 | Data Sheet | Manual | 3D CAD Renders |
Easy pan, tilt & zoom controls for your PTZ camera! Controls pan & tilt with variable speeds to match every option inside PTZOptics cameras. Use a 2 & 3-dimensional joystick with “twist” control of focus and zoom! Easily set up pan and tilt limits using the latest version of the PTZOptics camera firmware.
Tip: Setup pan limits to restrict camera operators from moving outside a given area. Set up boundaries limits for fast-moving sports games like basketball and hockey. This way, your camera operators can quickly move left or right without ever “overshooting” the game space boundaries.
Tip: Lower tilt limits when tracking presenters on stage. If your camera operators are mainly concerned with left to right movement, avoid accidentally tilting the camera up or down by reducing the camera’s motor speeds for this action.
This PTZ joystick controller is compatible with most PTZ cameras, including Sony cameras! Pair it with PTZOptics or HuddleCamHD cameras to experience its full capabilities.
Yes. This joystick controller can be powered via an Ethernet cable with Power over Ethernet (PoE).
This joystick can control up to 255 network-connected PTZ cameras. Each camera requires an IP address in order to be setup with the controller. It can also control up to 7 cameras connected via serial VISCA.
Yes. The speed button on this PTZ joystick controller allows camera operators to set unique speeds for pan, tilt and zoom. You can also set speed levels for PTZ preset recall.
