PTZ Camera Pole Mounts

Universal small-base PTZ camera mount

SKU: HCM-1-xx    Data Sheet | Manual

Pipe and ceiling flange not included

SKU: HCM-1C
UPC: 737993157625
MSRP: $121

PTZOptics USA Made Camera Pole Mounts

Find the ideal mounting location for your PTZ cameras with PTZOptics Pole Mounts

PTZOptics camera pole mounts are made in Pennsylvania, USA from high quality steel. The finished product is available with a white powder coat finish which is designed to provide a durable product that will last you many years. This mount has been designed to be compatible with almost all PTZ cameras which feature the industry-standard 1/4″-20 (Quarter-Twenty) mounting screw connection. Therefore this mount will work with all PTZOptics cameras and most small based SONY, Panasonic, Vaddio, Cisco, Polycom, DataVideo and Lumens cameras.

PTZ Camera Pole Mounts

This camera pole mount has been designed to install PTZ cameras to ceilings using a 1″ NPT pipe. This pole mount includes the ceiling mount, a quarter-twenty connection screw, a set screw, and all other necessary hardware for securing your camera to a 1″ threaded pipe.

Please note: that professional installation may be required for this product. You can run cabling through pipe or dress outside of pipe for a clean installation aesthetic.

Beautiful installation options

Get the perfect mounting height and viewing angle for your camera using a pole mount attached to a secure mounting location. Professional installers can use long lengths of pipe to place cameras in the perfect locations.

Please note: PTZOptics Pole Mounts do not include pipe and ceiling flange needed for a complete installation.

What’s included with our Pole Mounts?

All of the hardware you need to attach your PTZ camera to an existing 1″ pole is included. Therefore you will receive the ceiling, a 1-1/4-20 mounting screw, a 10-32 x 1/4″ cup point set screw, a 3/32″ long arm hex wrench (for set screw) and two 14″ washers.

Please note: When attaching the pole mount to your 1″ pipe tighten until pipe can no longer be tightened with a pipe wrench. If you are using a 1.5″ plate or flange, you must use a 1.5″-1″ reducing bushing which is described in more detail in the included manual.

It’s not a pipe dream

PTZOptics Pole Mounts are designed by video production professionals for the most demanding applications. If you need to secure any standard small based PTZ camera to a pole, this is the camera pole mount for you. Please consider reading through our detailed user manual to learn more about how you can use this mount. You can mount your camera upright or inverted using the universal design and included quarter-twenty mounting hardware. Additional washers are included to make sure almost any camera can be installed properly and held in the desired location. Once your camera has been installed you can run cabling through the pipe or dress to outside of pipe for a clean installation aesthetic.

Find a Camera Mount